Cloud-electronics PM16 Manual do Utilizador descarregar pdf (Página 19)

PM4/8/12/16 & PM4/8-SA Installation and User Guide v1.0

Sending a pre-recorded message to a zone group – groups E to H

(Model PM8-SA only)

1. ‘Double-click’ the GROUP button for the required zone group. (The zone LEDs

corresponding to the zones dened for the group will illuminate.)

2. Press the MESSAGE button for the required pre-recorded message; the

associated LED will illuminate to conrm selection.

3. To broadcast the message, press and release the TALK/SEND button. The BUSY

LED will illuminate for the duration of the message.

4. Zones may be selected/deselected during the message.

Cancelling a message

If the microphone has been enabled for message cancellation, pressing CLEAR while a

message or pre-message chime is sounding will cancel the operation.

Announcement Interruption (Multiple PM systems only)

If the system has more than one PM microphone, it is possible that announcements

or message broadcasts may be attempted from different microphones simultaneously.

Priority assignments made during the system installation can prevent two microphones

on the network from making an announcement or sending a message at the same time.

You may therefore nd that your announcement or message is temporarily overridden

by another announcement or message, from a PM with higher priority.

If your announcement or message conicts with one from a higher priority microphone,

yours will be cut off and the interrupting announcement or message will take over. The

interrupted PM will indicate this condition by the ZONE LEDs ashing. The selection

LEDs will remain lit so that you can make your announcement, or broadcast your

message again once the system is free.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Sem comentários

Cloud-electronics PM16 Manual do Utilizador Página 19