Cloud-electronics PM1 Manual do Utilizador

PM1Paging MicrophoneInstallation and User Guide

PM1 Installation and User Guide v1.010Note that the mic capsule is a dynamic type and no phantom power is required. Ensure that the microphone input u

PM1 Installation and User Guide v1.011The other end of the control cable should be connected to the host mixer’s Access Port. It may be necessary to c

PM1 Installation and User Guide v1.012Cable lengthsThe maximum permissible length of cable between the PM1 and the host mixer is dependent on the qual

PM1 Installation and User Guide v1.013SpecicationsMICROPHONEType Dynamic, CardioidFrequency Response 80 Hz – 15 kHzSensitivity -54 dB ±3 dB (0 dB = 1

PM1 Installation and User Guide v1.014Microphone frequency responseSource level: 0.1 PaMeasurement distance: 50 cmTest instruments: Bruel & Kjaer

PM1 Installation and User Guide v1.015Notes

Cloud Electronics Limited140 Staniforth Road, Shefeld. S9 3HF. EnglandTel: +44 (0)114 244 7051 Fax: +44 (0)114 242 5462email: [email protected] web: w

Introduction ...4Safety Information...

PM1 Installation and User Guide v1.04IntroductionSafety InformationThe Cloud PM1 contains no active electronics and thus requires no AC or DC voltage

PM1 Installation and User Guide v1.05OverviewThank you for purchasing this Cloud PM1 paging microphone.The PM1 is a single-zone, passive paging microp

PM1 Installation and User Guide v1.06Scope of this guideThe primary purpose of the guide is to describe the connection of the PM1 to a host zoner or m

PM1 Installation and User Guide v1.07PM1 components4 Cable access holes5 Rubber feet (x3)6 Base securing screws (x5)7 Screws for internal cable clamps

PM1 Installation and User Guide v1.08Using the PM - Recommendations for useTo the installer: please photocopy this section and leave with the customer

PM1 Installation and User Guide v1.09Cables and connectionsConnections to the PM1 are made via two 3-way screw-terminal connectors on the internal PCB