Cloud-electronics PM16 Manual do Utilizador descarregar pdf (Página 16)

PM4/8/12/16 & PM4/8-SA Installation and User Guide v1.0

Using the PM (SA models) - User Instructions

To the installer: please photocopy pages 16 to 19 section and leave with

the customer.

General Dos and Don’ts

When making an announcement:

• Think what you need to say before making the announcement.

• Speak slowly and clearly in a normal speaking voice.

• Don’t “swallow” the microphone; unless you are in a particularly noisy

environment your mouth need be no closer than 4 - 5 inches (10 – 12 cm) from

the mic.

• Don’t start speaking before you press the TALK/SEND button, and then wait until

the pre-announcement chime (if active) has sounded in full before starting.

• Don’t release the TALK/SEND button until the announcement is nished.

• Don’t twist the gooseneck into odd shapes – it isn’t a toy!

• Familiarise yourself with the contents of the pre-recorded messages – sending

the wrong one can be embarrassing!

Paging one or more zones

1. Press the ZONE button(s) for the zone(s) to which the announcement is to

be made; the LEDs corresponding to the selection will illuminate. (An incorrect

selection may be cancelled with the CLEAR button.)

2. To start announcing, press and hold down the TALK/SEND button (the BUSY

LED illuminates).

3. Make the announcement.

4. Zones may be selected/deselected while the TALK/SEND button is pressed.

5. When the announcement is nished, release the TALK/SEND button.

NOTE: Once the talk button is released, the zone selection may either automatically

clear or remain set for further announcements, depending on how the unit was

congured at installation. If it remains set, it may be cleared by pressing the CLEAR

button.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Sem comentários

Cloud-electronics PM16 Manual do Utilizador Página 16