Cloud-electronics WP-8W Manual do Utilizador descarregar pdf (Página 10)

WP-8 Installation Guide

Connecting an external amplier and/or speakers

The WP-8 is provided with additional outputs, which can be used to drive

external low-power loudspeakers directly, active loudspeakers or the line

inputs of an external amplier. Both stereo and mono congurations are

possible.

Connections are made to the 6-way screw-terminal block

on the rear

PCB. The pinout of this connector block is as follows:

PIN MARKED CHANNEL PURPOSE

1 0V

LEFT

Output – (0 V)

2 L+ Switched output +

3 L+ Permanent output +

4 0V

RIGHT

Output – (0 V)

5 R+ Switched output +

6 R+ Permanent output +

Note that both ‘switched’ and ‘permanent’ outputs are available. The switched

outputs are wired internally via switch contacts on the front panel headphone

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Cloud-electronics WP-8W Manual do Utilizador Página 10