
6 Pump Station 16-R: I
NSTALLATION AND OPERATION MANUAL
The WP-8 will provide 150mW of power in stereo configuration and 300mW in mono into 8Ω
speakers. The impedance of the speakers is not critical however the unit will deliver more
power into speakers with an impedance of >8Ω.
Be vigilant when wiring the WP-8 since wiring errors can cause flawed operation. If a problem
is experienced, turn off the power, disconnect the WP-8 and double-check the wiring.
The Cloud WP-8 is designed to be wall mounted. The WP-8 is the same physical size as a
single UK electrical socket (13A Type) and can be mounted in the recessed back box provided
or be surface mounted in a standard 25mm deep housing.
The Cloud WP-8 is fitted with a 3.5mm stereo jack socket that will accept a pair of stereo
headphones. We recommend the use of headphones with 32-ohm impedance for example, the
Cloud CP-32.
It is also possible to obtain a line level output from the WP-8 by wiring it as follows:
Permanent Line Level Output (Stereo) Switchable Line Level Output (Stereo)
Permanent Line Level Output (mono) Switchable Line Level Output (mono)
The output of the WP-8 can be used to drive a pair of powered speakers if extra volume is
required. The diagram below shows how this can be achieved.
Powered Speaker Output (mono) Powered Speaker Output (stereo)
16-07-02 V2.1
Comentários a estes Manuais